CN
/C Leak Sealants；Leak Stop For A/C Systems;Car Air Conditioner Sealant
Refrigerant A/C Stop Leak；Automotive A/C Refrigerant Leak Sealant
SUNLONGE SLS1000 A/C stop leak will permanently stop leaks in condenser, connection hoses, evaporators, gaskets and o-rings in systems that can hold 5 inches vacuum for 25 minutes.
It is not recommended for systems that lose more than 1 pound of freon per day or leaking compressors.
It is 100% safe for all A/C systems, and will not damage the orifice tubes of recovery equipment.
SLS1000 A/C Leak sealants features a specially formulated blend with a pleasant aroma. During the inspection, the aromatic scent is noticeable due to the addition of an eco-friendly fragrance, which can be detected while testing.
SLS1000 A/C Leak sealant can address multiple issues with a single application. It enhances the performance of A/C systems, improves cooling efficiency, and extends the lifespan of the A/C.
Advantage of SLS1000 A/C leak sealant:
1. Non-polymer, will not damage the system.
Non-chemical leak sealant does not produce any polymers. The product is polymer-free, ensuring it causes no harm to the system and does not react chemically with oxygen.
2. Automatic rapid leak detection and repair.
After adding the leak sealant, it works with the refrigerant oil in the pipeline. When a leak point is detected, the sealant automatically enters the leak point to seal micro-leaks.
3. Long-term leak prevention maintenance
After injection, the leak sealant operates continuously in the pipeline, maintaining the air conditioning system and effectively preventing leaks over the long term.
4. One-step solution for A/C leaks.
A single injection can seal leaks in the A/C system, effectively working on evaporators, condensers, aluminum pipes, rubber hoses, O-rings, etc. It can seal leaks up to 0.3MM in size.
SLS1000 A/C leak sealant instruction:
1. Start the vehicle and turn on the A/C system. After 5 minutes, pull back the blue ring of the quick connector that comes with the leak sealant and snap it onto the low-pressure port (anti-dust cap L) of the thick A/C pipe.
2. Before the usage, ensure the arrow on the one-way valve in the middle of the connecting tube points towards the quick connector. Then tighten the injector onto the outer thread of the short pipe.
3. Press firmly until all sealant is dispensed. Remove the quick-connect fitting and wait 10 minutes before turning off the A/C system.
