CN
SL3100T Leak detection dye for swimming pools，SL3100T Water-Soluble UV Tracer Fluorescent Yellow Dyes Color for Pond Water Tracing, SL3100T Swimming Pool Leak Detection;
Sunlonge SL3100T Pool Leak Detection Dye Water Soluble UV Pool Dye Fluorescent Yellow Tracing for Swimming Pool Leakage
SL3100T is a biodegradable fluorescent water tracer with an innovative extra concentrated formulation! Ideal for pool leak detection and water infiltration testing;SL3100T aer Biodegradable ,Environmentally Frienoly,Fluorescentunder Uv Lamp,Cleaning Easy,Ready To Use
THE STRENGTHS
• A single dose of 60 ml to tint over 3000 liters of water
• Ideal concentration and format for searching for pool leakage
• optimal and progressive dosage thanks to its graduation to the ML and its needle
• A reformable cap for several uses
• Clean and precise manipulation
• Light and easy to transport
• SUNLONGE in 365 Nm UV light from SUNLONGE
• Bright colors, easily identified
• Very good solubility, easy dispersion
• Easy cleaning with Brillant Remover.
• Biodegradable, non -polluting, non -toxic (respect the conditions of use and asscribed dosage)
PRODUCT SPECIFICATIONS:
Appearance : concentrated liquid, no particular odor
Color in aqueous solutions : neon yellow / green fluorescence under UV light
The «fluorescent» effect depends on the concentration of dye; however,
beyond a certain dose, this fluorescence tends to disappear.
Excitation wavelength : around 365 nm (fluorescent lamp)
Emission wavelength : around 520-525 nm
pH (at 20°C) : about 8-11, in aqueous solution
Alkali resistance : good resistance
Melting point: 320°C
Shelf life: at least 5 years, in hermetically sealed
packaging, protected from light, moisture, freezing, and heat.
SL3100T Swimming Pool Leak Detection:
| Content | Data |
| Suitable wavelength for fluorescence inspection. | 365NM |
| Typical usage ratio(L) | A single dose of 60 ml to tint over 3000 liters of wate |
| Solubility(Petroleum products) | Insoluble |
| Solubility (Water) | Fully dissolved |
| Density（20 °C） | 1.05—1.15 |
| Flash Point | >100°C (212°F) |
| Ionic | Anionic |
| Stickiness | ≤60 |
| Seal Material Compatibility | All rubber, plastic and metal parts (including concentrated and diluted dye) |
SL3100T Leak detection dye for swimming pools
Application Recommendations:
• Shut off the water supply to stop any movement and facilitate detection.
• Ensure that the water level is above the suspected leak.
• Ensure that the product is used more than 12 hours after water treatment products (chlorine, etc.) have been added.
• Ensure that the pH of the water is greater than or equal to 7.
• Assemble the kit: fit the extension tube onto the syringe tip.
• Using the kit, draw the required amount of product directly from the bottle.
• Carefully dip the extension tube into the water at the suspected leak and inject the product with small pulses.
• If there is a leak, the fluorescent yellow dye will be sucked in and locate the leak.
• Wait for the dye to disappear before swimming again. In water, the dye disappears in less than an hour in daylight and sunlight. This time is longer if the product is used in a closed, unlit room.
• Clean the kit with water after use.
MAIN APPLICATION AREAS
Swimming pool, pond, shower tray, bathtub leak detection
Hydrology : Swimming pool leak detection, tracing waterways or leaks in pi
pelines (wastewater and rainwater networks), river flow measurements, tracing ocean currents…
